1/1 Octave Mode Screen - sauter SW 1000 Instruction Manual

3.3 1/1 Octave Mode screen

SW-BA-e-1710
GPS screen 2
Display of the number of satellites used to determine the
position and the signal-to-noise ratio for all the visible sat-
ellites (0–99 dB).
☆ Hint: The number of visible satellites can be higher
than the number of satellites used to determine the posi-
tion, as many satellites are not available for position de-
termination.
1/1 octave bar chart
Shows 10 bands in a range from 31.5 Hz to 16 kHz and
the L , L , L
Aeq Beq Ceq
chart. Press the navigation keys <▲> and <▼> to see
detailed values for each band. You can define a threshold
value for each band. If the data exceed the threshold
value, a red LED will light up.
Octave Table screen 1
Shows measurement data within a range from 31.5 Hz to
500 Hz. If the data exceed the threshold value, a red LED
will light up and the
Octave Table screen 2
Shows the measurement data within a range from 1 kHz
to 16 kHz. If the data exceed the threshold, a red LED will
light up and the symbol will appear.
Octave Table screen 3
Shows the measurement data of LAeq, LBeq, LCeq and
LZeq. If the data exceed the threshold value, a red LED
will light up and the
, L parameters in the form of a bar
Zeq
symbol will appear.
symbol will appear.
19