Display Return Of 180; Measurements (Track Mode); Peak-Hold Function (Peak Mode); Backside Fixing To A Test Stand - sauter FK 50 Instruction Manual

UNIT:
Press shortly to select the desired unit: N, kg, lb, ou
ZERO:
- Zeros the measurement result (Tare function)
- Cleans the peak value (in Peak mode)
5.3 Display Return of 180°
When the instrument itself is turned for 180°, the display indication will turn automati-
cally.

5.4 Measurements (Track Mode)

On the display (1) the continuous force is shown in a defined direction (3)
To zero the display, please press ZERO key

5.5 Peak-Hold Function (Peak Mode)

To activate please press: MAX key

6 Backside Fixing to a test stand

Mounting is possible on all SAUTER test stands by means of 4 x M3 screws.

7 Warning notices

Force measurements which are performed in an incorrect way, can lead to serious
injuries of living beings and damage of objects. Therefore, trained staff may practice
them only.
Please avoid that forces are reacting on the force gauge, which are exceeding the
instrument's max. load (max). Or if forces are not reacting axially from the force sen-
sor onto the instrument or if high impulse forces are reacting on the force gauge.
FK-BA-e-1614 5