Rs-232; File Manager - sauter SW 1000 Instruction Manual

4.4.7 RS-232

RS-232 Mode:
RS-232 options: Remote, Printer. Press the navigation keys <◄> and <►> to
choose an option. In the Remote mode, the RS-232 port provided in the sound
level meter enables control and data transmission. In the Printer mode, the RS-
232 interface allows to connect a thermal printer (option).
ID Setup:
In the ID Setup menu (further information, see 5.2.2 Device ID), you can set an
ID number which allows you to differentiate between several sound level meters
connected to the network. The ID can be set within a range from 1 to 255. Press
the navigation keys <◄> and <►> to choose an option.
BaudRate:
The BaudRate (further information, see 5.1 Hardware Configuration and Inter-
face Settings) determines the rate of data transmission by RS-232: 4,800 bps,
9,600 bps, 19,200 bps. Press the navigation keys <◄> and <►> to choose an
option.
The following options are available:
FlowControl: (See 5.2.7. Flow control). The flow control allows you to set the
data flow mode at remote operation. Options: Software, Programme. Press the
navigation keys <◄> and <►> to choose an option.
Response:
Response (further information, see 5.3 Instructions). It allows activation or deac-
tivation of the response signal (ACK/NAK). Options: ON, OFF Press the naviga-
tion keys <◄> and <►> to choose an option.

4.4.8 File Manager

32
The RS-232 menu allows to set a serial port option, see section 5
RS-232 Data Exchange Protocol.
The File Manager allows you to manage the saved SWN, OCT
and CSD files. The figures given in each line on the right indicates
the number of files of each type. With the navigation keys <▲>
and <▼>, you can choose the option and open the next menu
level by pressing <ENTER>.
In the SWN File menu, you can delete the SWN
files using the navigation keys <▲> and <▼>.
Select the number of the file to be deleted. You
will see the file number at the bottom edge of the
screen. If you enter 0000 as the file number, you
will delete all the available SWN files.
SW-BA-e-1710