Measurement; Measurement Setup - sauter SW 1000 Instruction Manual

(6) To start the measurement, open the home screen again and press
<START/STOP>. If the calibrator works properly, for the example given in this
manual the current measurement result is 93.8 dB.

4.3 Measurement

4.3.1 Measurement setup

Delay:
Delay between pressing <START> and beginning the measurement. With the
navigation keys <◄> and <►>, you can choose the delay as follows:
Sync 1 min, Sync 15 min, Sync 30 min, Sync 1 h, or 1 s to 60 s.
The delay prevents the influence on the measurement by vibration or key press-
ing.
Itg.Period:
Itg.Period is the integration period for each individual measurement. At the be-
ginning of each integration period, the integration and time data are reset, and
the indication of overload or exceeding the lower range limit is deleted. The inte-
gration and time data are: LEQ, Max, Min, Peak, SD, SEL, E and LN. With the
<◄> and <►>, you can select the following options: indefinite, 1 s to 59 s, 1 min
to 59 min, 1 h to 24 h.
Repeat:
The number of measurement repetitions. Total measurement time = Itg.Period ×
Repeat. With the <◄> and <►> keys, you can choose the following options: Inf,
1~9999.
SWN Logger:
Press the navigation keys <◄> and <►> to switch. If you choose this option, the
sound level meter will save the data as SWN/OCT files.
The SWN/OCT files are used to save the time history data. The data source in
the sound level meter mode is the profile 1–3 (select profile 1–3 in "SWN
Save"); the data are saved as an SWN file. In the 1/1-octave mode, all the oc-
SW-BA-e-1710
The Measurement menu includes 13 options.
Using the navigation keys <▲> and <▼>, you
can choose the options and open the next menu
by pressing <ENTER>.
The MEAS.Setup menu is the most important for the measure-
ment. Here you can set the following parameters: Delay, Integra-
tion Period, Repeat, SW Log.Step, SWN Log.Step, CSD Log-
ger and CSD Log.Step. You can choose the options by pressing
the navigation keys <▲> and <▼>.
23