Advertisement
Button field
<PWR>
<ESC>
Navigation
buttons
<▲><▼>
<◄><►>
<Backlight>
<Menu>
<PWR>: In order to turn on or turn off the sound level
meter, push it and hold for 2 s.
☆NOTE: It is not possible while the measuring
device is taking measurements!
<ESC>: Pushing the button causes closing of the
menu, returning to the previous screen or deleting the
characteristics on the "Time course" screen.
<Enter button>: Pushing it causes the display of the
next menu; saving of the change introduced; saving in
the form of CSD file with the device turned off.
<Backlight>: Turning on/off of the LCD display
backlight. Setting the backlight time in the menu
Settings (Ustawienia) ->Backlight (Podświetlenie).
<Start/Stop>: Measurement start/stop; calibration start
with the use of the menu Calibration (Kalibracja) ->
After the measurement (Po pomiarze).
SW 1000_SW 2000-KA-e-1710
Sauter GmbH
Ziegelei 1 Telefon: +49-[0]7433-9933-0
Fax: +49-[0]7433-9933-149 Internet: www.kern-sohn.com
D-72336 Balingen
Email: info@kern-sohn.com
SW 1000 / SW 2000
Indicator
LCD display
<Enter button>
<Start/Stop>
<▲>: Up arrow button, while selecting the option or
changing the value.
<▼>: Down arrow button, while selecting the option
or changing the value.
<◄>: Left arrow button, while selecting the option,
changing the value or moving to the next screen.
<►>: Right arrow button, while selecting the option,
changing the value or moving to the next screen.
<Menu>: Pushing it causes the display of the menu.
Display screen
The meaning of the given symbols:
Measurement start/stop.
Range
below).
ICCP
whether ICCP module is turned
off.
Flip-flop status. It is displayed in
the flip-flop mode.
RS-232 interface status. It is
displayed in the remote control
mode
mode
USB port status. It is displayed
after connecting the device to the
computer.
exceeded
(above
or
module
status.
Shows
and in the printer
.
3
Advertisement
