Screen Of The 1/1-Octave Mode - sauter KERN SW 1000 Instruction Manual

3.3 Screen of the 1/1-octave mode

18
GPS page 2. display the
number of satellites for
positioning and
signal-to-noise ratio of all
visible satellites (0 dB -
99 dB).
☆ Note: The number of
visible satellites may be
greater than the number
of satellites
positioning because
some satellites are not
available for positioning.
1/1-octave histogram
Displays 10 bands from
31.5 Hz - 16 kHz and
, LBeq, , LZeq as
LAeq LCeq
a bar graph. Press the
arrow keys <▲> , <▼>
to display the detailed
value of each band. A
threshold value can be
defined for each band.
The LED lights red when
the data exceeds the
threshold.
Octave table page 1.
display of measured data
from 31.5 Hz - 500 Hz.
The LED lights red and
appears when the data
exceeds the threshold
value.
Octave table page 2.
display of measured data
from 1 kHz - 16 kHz. The
LED lights red and
appears when the data
exceeds the threshold
value.
the
for
SW-BA-e-2020