Gps; Setup Template; About; Language - sauter SW 1000 Instruction Manual

Modem Mode:
In this case, after the device is connected to a computer using a USB cable, it
will always operate in the Modem Mode without showing the question. The
sound level meter can be detected by the computer as a serial (virtual) port us-
ing the same protocol as RS-232 interface (further details, see section 5. RS-232
Data Exchange Protocol).

4.4.11 GPS

4.4.12 Setup Template

4.4.13 About

4.5 Language

SW-BA-e-1710
In the GPS menu, you can activate and deactivate the GPS and
Auto Time Sync options. If GPS is deactivated, the internal GPS
module is off. Upon activation of Auto Time Sync, the system
clock installed in the sound level meter is synchronised with the
GPS time.
The "Setup Template" menu allows you to save five parameters of
user group settings for different applications of the sound level
meter.
☆ Hint: The template does not affect the calibration factor. Do not
try to upload the old version of the template into the new version
of firmware, as there might be some modifications.
If the template is empty, press <ENTER>. The
template allows to save the group settings
whose description can be defined by the user
with five letters or digits.
Press <ENTER> to upload or delete the present
template.
In the "About" menu, you can see the following information: type,
class, serial number, version and HWID (hardware ID) of the
sound level meter.
The sound level meter supports six languages: English, Chinese,
Portuguese, Spanish, German and French. With the navigation
keys <▲> and <▼>, you can select the language and confirm by
pressing <ENTER>.
35