Measurement Screen; Screen Symbols And Their Meanings - sauter SW 1000 Instruction Manual

is lower during rain or indoors.
The GPS mode has 3 start modes: cold start, warm start and hot start.
 The initial position determination, when the current ephemerides must be
downloaded, requires more time.
 The GPS module stores the last location information data saved, but it requires
another downloading of the ephemerides, as they are obsolete. The warm start re-
quires almost the same time as the cold start.
The GPS module includes the current ephemerides, so the position can be deter-

mined in a very short time.

3 Measurement screen

The sound level meter has two measuring modes: Level Measurement and 1/1 Oc-
tave Measurement. The user can choose the type of measurement in the Function
menu.
The level measurement includes 8 screens that you can switch using the navi-
gation keys <◄> i <►>. The 8 screens are: home, 3 profiles, LN statistics, time his-
tory, custom measurement 1, custom measurement 2, GPS 1 and GPS 2.
The 1/1 octave measurement includes 4 screens: octave bar chart and octave ta-
bles 1 to 3.

3.1 Screen symbols and their meanings

All the symbols on the home screen are active, their meanings are specified below:
16
Start/Stop. Defines the measurement status.
Overload or exceeding the lower range limit. If the arrow is
displayed continuously, the current status is "Overload" or
"Excess of lower range limit". The unfilled arrow indicates if
the lower range limit was exceeded or the device was over-
loaded during integration. Upon starting a new integration
period, the symbol of overload or excess of the lower range
limit is deactivated.
Status of ICCP module. It is shown when the ICCP module
SW-BA-e-1710