Boot Mode - sauter SW 1000 Instruction Manual

4.4.9 Boot Mode

Normal:
The hardware mode switch should be set to Normal. This is the normal operat-
ing mode of the sound level meter.
Power & Boot:
In this case, the hardware mode switch should be set to Boot. When you select
this mode, the sound level meter will boot after power supply is detected. The
SW-BA-e-1710
In the OCT File menu, you can delete the OCT
file. The procedure is the same as for the SWN
File.
In the CSD File menu, you can delete, display or
print the content of the CSD file. By pressing the
navigation keys <▲> and <▼>, you can move
the cursor between Select and Option. The de-
letion procedure is the same as for the SWN
File.
To display or print the content of the CSD file,
select Option in the CSD File menu and press
the navigation keys <◄> and <►>.
To display or print the file content, select the file
number and operation, and then press <EN-
TER>.
With the navigation keys <▲>, <▼>, <◄> and
<►>, you can view the file content in the View
mode. The Print mode is almost identical to the
View mode. Press <Enter> to print the content
of the currently displayed CSD file.
With the navigation keys <▲> and <▼> in the Boot Mode menu,
you can select
Boot & Auto Meas..
☆ Hint: The hardware mode switch located in the battery con-
tainer should be set accordingly to the boot mode.
the modes: Normal, Power & Boot or
33