Advertisement
Quick Links
Instruction Manual
Digital Coating Thickness Gauge
SAUTER TC car
Version 1.2
08/2017
GB
Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: info@sauter.eu
Tel: +49-[0]7433- 9933-199
Fax: +49-[0]7433-9933-149
Internet: www.sauter.eu
PROFESSIONAL MEASURING
TC_car-BA-e-1712
Advertisement
Related Manuals for sauter SAUTER TC car
Summary of Contents for sauter SAUTER TC car
- Page 1 Sauter GmbH Ziegelei 1 Tel: +49-[0]7433- 9933-199 D-72336 Balingen Fax: +49-[0]7433-9933-149 E-Mail: info@sauter.eu Internet: www.sauter.eu Instruction Manual Digital Coating Thickness Gauge SAUTER TC car Version 1.2 08/2017 PROFESSIONAL MEASURING TC_car-BA-e-1712...
- Page 2 Instruction Manual Digital Coating Thickness Gauge Thank you for buying a SAUTER digital Coating Thickness Gauge. We hope you are pleased with your high quality Thickness Gauge with its big functional range. If you have any queries, wishes or helpful suggestions, do not hesitate to call our service number.
- Page 3 This coating thickness gauge is small in size, light in weight and easy to carry. Al- though it is complex and advanced, it is convenient to operate. Its ruggedness will allow many years of use if all the instructions are followed carefully. Please keep this instruction manual always within reach! Annotation: It is strongly recommended to adjust the new instrument before the first use, as described in paragraph 5.
- Page 4 PC- interface: with RS-232C interface Power supply: 4x 1.5V AAA (UM-4) battery Operating conditions: Temperature: 0 to 50°C Humidity: <80% Dimensions: 127 x 67 x 28mm (5.0 x 2.6 x 1.1Inch) Weight: about 81g (batteries not included) Accessories: - Carrying case - Instruction manual - F-sensor (inbuilt) - N-sensor (inbuilt)
- Page 5 play. The instrument enters the auto mode which can automatically recognize the base plate or base itself. b) The sensor 3-1 has to be placed onto a coating layer to be measured. The reading on the display is the thickness of the coating layer. c) For the next measurement the sensor 3-1 has to be lifted for more than 1cm, “0”...
- Page 6 6 Battery replacement a) If the battery symbol ``+/-``appears on the display, batteries should be replaced. b) The battery cover 3-4 has to be removed from the instrument and the batteries have to be taken out. c) Batteries (4x1.5V AAA/UM-4) have to be installed, paying carefully attention to polarity.