Measuring With Internal Sensor; Measuring With External Sensors; Plugging In And Unplugging External Sensors; Measurement - sauter FS Series Manual

9.3 Measuring with internal sensor

For units equipped with an internal sensor (not FS 2 and FS 4), the internal sensor is
displayed as channel 0 (CH0) when you click on the "Measurement" function. If an
external sensor is connected, CH0 is automatically deactivated and the external
channels are displayed instead.

9.4 Measuring with external sensors

The external measuring channels are displayed as CH1 and CH2 for FS 2-x and CH1
to CH4 for FS 4-x. On the external channels CH1 to CH4 it is possible to measure and
save the data simultaneously.

9.5 Plugging in and unplugging external sensors

To plug in or unplug the external sensors, the meter must be switched off or must be
in the main menu, press briefly. The start screen appears and you are in the main
menu.

10 Measurement

10.1 Start screen

Menu
Measurement
FS-BA-en-2210.docx 13