V. 2.008/2020 Instruction manual digital light meter Congratulations on purchasing this lighting knife from SAUTER. The purchase of this device once again enables a step forward in the accuracy of measurement technology. Although this is a complex and very sensitive instrument, it is still very robust and will last you many years if used correctly.
1 General information This digital illuminance meter is a precision instrument for measuring the illuminance in the work area. The sensor has a full cosine correction for oblique light incidence. The instrument is compact, robust and easy to use due to its design. The light sensitive component used in this light meter is a very stable silicon diode with a long lifetime.
Working temperature: 0°C to 40°C (32°F to 104°F) Humidity: 0 to 70 %RH Storage temperature: -10°C to 50°C (14°F to 122°F) Storage humidity: 0 to 80% RH Power source: 1 x 9V block battery, 6F22 Operating time: 200h Dimensions: 185mmx68mmx38mm Weight: 130 g Accessories:...
1. LCD Display: 3 ½ Digits with maximum reading value until 1999. 2. ON/OFF: With this button the luxmeter is switched on/off. 3. Hold key: With this key the current measured value can be fixed. The meter will not display new readings until the HOLD key is pressed again. 4.
1. As soon as a sufficient power supply is not ensured, the symbol appears on the LCD display and a battery change with a 9V block battery is necessary. 2. For this purpose the device must be switched off. The battery compartment cover on the back of the instrument is opened by simultaneously pressing and sliding it in the direction of the arrow.
Page 7
Social room, cloakroom 100-200 Reception, cashier 220-1000 retail shop Entrance stairs range 150-200 Shop windows, packing tables 750-1500 Front area of the shop window 1500-3000 Note: When the protective cap is on the photoelectric sensor, the display shows "0.00" continuously. If this is the case, please do not influence the potentiometer on the back of the housing.