Screen In The Level Measurement Mode - sauter SW 1000 Instruction Manual

The symbols are displayed in such a sequence all the time. All the symbols can be
seen on each screen and always have the same meaning.

3.2 Screen in the level measurement mode

SW-BA-e-1710
is deactivated.
Trigger status. It is shown when the trigger is active.
RS-232 interface status. The
mote mode, and the
Timer status. The
tive and was activated only once. The
that the timer is active and will be activated again.
Status of microSD memory. It is shown when the microSD
memory is active.
Switch-off status. The following symbols are shown, from left
to right: external power supply, battery power supply (with
voltage indicator), USB power supply.
Measurement calculation mode.
Filter status.
Detector status.
Profile symbol. Shows the profile number of the current indi-
cation.
Measured value.
Visualisation and displaying of measured values in the cur-
rent measuring range as a dynamic bar indicator.
Date and time.
Current screen number and total number of screens.
Ambient temperature indicator.
The symbol refers to the integration period, the
shows the current time. The measurement will stop when
the current time equals to the total measurement time (inte-
gration period * repetitions).
Home screen
Indication of measurement data, information on the filter,
detector, mode and profile number. The home screen only
shows the group of data from one of the 3 profiles. To
switch between the 3 profiles, press the navigation keys
<▲> and <▼> simultaneously.
symbol is shown in the re-
symbol — in the printer mode.
symbol indicates that the timer is ac-
symbol indicates
symbol
17