Promise Vess A2600 Product Manual page 78

Vess A2000 Series NVR Storage Appliance
Background Synchronization Rate
1. To change Background Synchronization Rate setting the in Background Activities Settings menu: Click the
Synchronization Rate drop-down menu and choose a rate:
• Low – Fewer system resources to Synchronization,
more to data read/write operations.
• Medium – Balances system resources between
Synchronization and data read/write operations.
• High – More system resources to Synchronization,
fewer to data read/write operations.
2. Click the Submit button.
l d i
ogicAl rive nitiAlizAtion
Technically speaking, Initialization is a foreground activity, as you cannot access a logical drive while it is
initiating.
Initialization is normally done to logical drives after they are created from a disk array. Initialization sets all data
bits in the logical drive to zero. The action is useful because there may be residual data on the logical drives left
behind from earlier configurations. For this reason, Initialization is recommended whenever you create a logical
drive.
Logical Drive Initialization Rate
To change Logical Drive Initialization Rate setting the in Background Activities Settings menu:
1. Click the Logical Drive Initialization Rate drop-down menu and choose a rate:
• Low – Fewer system resources to Initialization, more to data read/write operations.
• Medium – Balances system resources between
Initialization and data read/write operations.
• High – More system resources to Initialization, fewer to data read/write operations.
2. Click the Submit button.
72
Promise Technologies