Promise Vess A2600 Product Manual page 362

Vess A2000 Series NVR Storage Appliance
Configure connection in CLI
Configure RS-232 (Port 2)
Choosing this option enables the RS-232 port and disables the RS-422/485 port on the terminal
board.
1. Open CLI and type <enclosure –a mod –s "uartstaus=0">
2. Type <enclosure –v> and it will displays the UartStatus.
Configure RS-422/485 (I/O Terminal Board)
Choosing this option enables the RS-422/485 port on the terminal board and disables the RS-232
port.
1. Open CLI and type <enclosure –a mod –s "uartstatus=1">
2. Type <enclosure –v> and it will displays the UartStatus.
356
Promise Technologies