Vess A2000 Series NVR Storage Appliance
m
p
AnAgement
Ath
Use a USB keyboard and a VGA or HDMI monitor to establish a local out-of-band connection to the Linux-
based or Windows 7 operating system. The VGA port, HDMI and USB ports are also located on the rear panel
of the Vess, these are enabled by default upon booting up the system. Connect a VGA or HDMI monitor to the
appropriate port on the Vess, and connect a USB keyboard to either USB port on the rear panel.
Vess A2200/A2200s Ethernet, video monitor connections and USB ports
Vess A2600/A2600s Ethernet, video monitor connections and USB ports
Important
Be sure to place the monitor and keyboard on a stable and secure
surface before connecting them.
-
on site keyBoArd And monitor
USB 3.0
USB 2.0
HDMI port
VGA port
38
Promise Technologies
VGA port
HDMI port
USB ports