Promise Vess A2600 Product Manual page 236

Vess A2000 Series NVR Storage Appliance
The LED drive status indicators for the Vess A Class Series display different behavior
depending on which model is used. Read below for the Vess model you have.
Vess A2200 Left front panel LED
System
Status
v 2200 s
ess tAtUs
Each drive slot on the Vess A2200 has a single corresponding HDD Status LED for,
the LED display is located on the front panel. In addition to these, pay attention to the
System Status and Global RAID LEDs to get an idea of what might be wrong with the
affected hard drive.
Vess A2200 Status LED behavior
HDD Status One LED for each HDD carrier. Each LED lights GREEN when healthy, RED if the RAID member is
offline or there is a physical disk error, ORANGE indicates the drive is rebuilding, and a dark LED
indicates either no drive is installed or the drive is not configured. A RED LED here means that
drive should be replaced.
System Status Lights GREEN when healthy, RED if there is a critical problem (LD offline, fan malfunction, voltage
out of range, system temperature alert), blinks RED for HDD high temperature alert remains dark
when not ready. This will be RED if a hard drive has failed or has critical errors. Replace the drive
corresponding to the RED HDD Status indicator.
Global RAID Lights GREEN when healthy or RED if any RAID volume is offline, ORANGE for critical state of
Status any logical drive. If a hard drive has failed, this will be ORANGE. In this case, it will be necessary to
replace the affected drive and rebuild the affected RAID volume.
HDD Status LEDs
Global
RAID
led
s
230
Promise Technologies