Promise Vess A2600 Product Manual page 20

Vess A2000 Series NVR Storage Appliance
v A2600
ess BAckplAte connections
Access to physical data and management connections are located on the backplate of the Vess A2600/A2600s
including the optional I/O connections for sensor and alarm systems.
Feature Description
HDMI Provides video out connection for HDMI enabled monitors used to view the management
interface using CLI, CLU or WebPAM PROe.
VGA This is also used for a video out connection for VGA monitors, it is also used to view the
management interface using CLI, CLU or WebPAM PROe.
USB Use to connect to a USB keyboard for managing the Vess A-Class Series, or use it to trans-
fer data to or from a USB memory device.
RS-232 This is used for control line connection to an uninterruptible power supply (UPS).
Port 1
RS-232 Use this to connect to analog cameras via the analog camera input cable.
Port 2
Note: This connector cannot be used at the same time as the RS-422/485 connector.
Audio In Use for input from a peripheral audio device, such as a microphone. Plug-In Power micro-
phones are supported.
Audio Out Use for output (line out) peripheral audio device (speakers, for example).
RS-422/ Use this to connect to analog cameras via the analog camera input cable.
RS-485
Note: This connector cannot be used at the same time as the RS-232 connector.
Note
Analog camera connections are available through either the RS-232 Port 2 or the
RS-422/RS-485 connections. These cannot be used simultaneously.
14
Promise Technologies