Promise Vess A2600 Product Manual page 39

Product Manual
v A2600
ess drive cArriers
The instructions below apply to drive carriers used with
the Vess A2600 or Vess A2600s.
1. Grasp the handle and slide the latch to the left as
far as it goes.
2. Press the square button to the right of the latch to
release it. The latch with pop out.
3. Pull the latch out to open the door and lever
the tray part of the way out. Then pull the latch
straight back about 2 centimeters to expose the
front portion of the tray assembly. Grasp the
corners of the front assembly with the thumb and
forefinger of each hand and pull the tray completely
out of the enclosure, sliding it straight out. The tray
is now ready to receive a new hard disk.
33
Hardware Setup