Promise Vess A2600 Product Manual page 196

Vess A2000 Series NVR Storage Appliance
event
Usage
event [-a <action>] [-l <location>] [-i <SeqNo>] [-c <event count>] [-v]
event -a clear [-l <location>]
Summary
The event command displays and clears the RAM and NVRAM event logs.
Options
-a <action> Specified the action to perform.
list Displays the events for the specified location. RAM events are displayed if no
location is specified.
clear Clear events for a specified location.
-l <location> Specifies the location from which to display or clear events.
ram All events are stored in RAM. These events are lost after rebooting.
nvram Some events are also stored in NVRAM. These events remain after rebooting
and are a subset of the RAM events.
-i <sequence ID> Specifies a specific event by its sequence number. This is a starting point.
Requires the -a list option. You can use the -c option.
-c <event count> Specifies the number of events to retrieve when displaying events.
-v Verbose mode. Requires the -a list option.
190
Promise Technologies