Vess A2000 Series NVR Storage Appliance
M
AnAgIng wItH
This chapter describes using WebPAM PROe to monitor and manage your RAID system.
l
w
ogging into
You can log into WebPAM PROe in either of two ways:
•
"Logging in at the Enclosure" on page 58
•
"Logging in over the Network" on page 59
l
ogging in At the
At the Vess enclosure to log into WebPAM PROe, do one of the following actions:
•
Double-click the WebPAM PROe desktop icon.
•
Choose WebPAM PROe in the Windows Programs menu or the Linux Applications menu.
•
Follow the steps under "Logging in over the Network" on page 59.
Pam Pro
eb
e
e
nclosUre
Note
The default IP settings for the four Gigabit Ethernet ports are:
Port 1 = 192.168.0.1
Port 2 = 192.168.1.1
Port 3 = 192.168.2.1
Port 4 = 192.168.3.1
IP settings for the ports are controlled by the OS. Use the normal IP
settings configuration procedure for the OS you are using if you want
to change the default settings.
w
pAM pro
eb
58
Promise Technologies
e