Product Manual
writeback
ReadPolicy=
readahead
readcache
nocache
PreferredCtrlId=
-v
Verbose mode. Used with -a list.
Examples
logdrv
logdrv -v
logdrv -a mod -l0 -s "readpolicy=readahead"
logdrv -a locate -l2
logout
Usage
logout
Summary
The logout command is used to logout the current user from the session.
Examples
logout
Writes are cached. Note: Cannot be set if ReadPolicy is set to
"nocache."
Specifies logical drive read policy.
Reads extra data to help reduce read times of sequential data.
Caches reads in the case the same request is made again.
No caching algorithm.
Specifies which controller the LD is prefers for LUN affinity. Valid value
is 1 or 2.
199
Managing with the CLI