Promise Vess A2600 Product Manual page 49

Product Manual Hardware Setup
r p led - v A2600/A2600
eAr Anel s After poWer on ess s
When system boot-up is finished, use the LEDs on the controller on the rear of the device to monitor various
functions (described below).
LED Description (refer to product manual for more details)
System Fan A steady GREEN LED indicates normal fan function. A RED LED indicates fan failure, the
fan must be replaced.
Ethernet
The LED located on below each port, on the left side, lights green when connected, flashes
Link/Act and Speed green when there is activity on the port and remains dark no connection has been estab-
lished. The LED on the lower right of each port indicates connection speed, green is 100
Mbps, ORANGE is 1000 Mbps.
Vess A2600/A2600s rear panel LEDs
Fan Status
Gigabit Ethernet port LEDs
43