Promise Vess A2600 Product Manual page 357

Product Manual IO Terminal Board Information
Check Sensor Input Status in CLI
To check the status for the device that issues a warning to the terminal board. Follow these steps:
1. Open the CLI interface, type <enclosure –v> the sensor status displays.
2. The Sensor Status displayed is dependant on the input pair that is used on the Sensor Input
interface. For example, the Input 4 pair (IN_4+ and IN_4-) displays Sensor Status 247.
Use the value to calculate which pair is connected to a camera or alarm. Use"Terminal Board FAQ"
on page 358 and 15 in "FAQ".
351