Product Manual
SNMP Settings (CLU)
By default, Simple Network Management Protocol (SNMP) service is set to Automatic and its normal
status is Started.
To make SNMP service settings:
1. Main Menu >> Additional Info and Management >> Software Management >> SNMP
>> Startup Type
2. Press the spacebar to toggle between Automatic and Manual .
3. Highlight the following and press the backspace key to erase the current value, then type the
new value:
• Port Number – 161 is the default
• System Name – (optional) Type a system name in this field
• System Location – Type a country name in this field
• System Contact – Type the email address of your system administrator in this field
• Read Community – Type a community name in this field
4. Press Control-A to save your settings.
To start, stop or restart the SNMP service, highlight Start , Stop , or Restart and press Enter .
163
Managing with CLU