S Upply - Promise Vess A2600 Product Manual

Vess A2000 Series NVR Storage Appliance
r
eplACIng A
The power supply and its fans are replaced as one unit. There are no individually serviceable parts.
No tools are required for this procedure, though you can use a Phillips head screw driver to loosen
and tighten the PSU set screw instead of your fingers if you prefer.
Removing the Old Power Supply
To remove the power supply:
1. Verify that the PSU status LED is red.
2. Unplug the power cord.
3. Turn the set screw counter-clockwise to loosen it. The screw is retained on the power supply
housing.
4. Grasp the handle and pull the power supply straight out of the enclosure.
Power supply for Vess A2600
Handle
p s
ower upply
PSU set
screw
224
Promise Technologies