Promise Vess A2600 Product Manual page 65

Product Manual
l
ogging in over the
For Vess A-Class Series running Windows OS, it is necessary to disable
the Windows Firewall in order to allow access to WebPAM PROe through
the network interface. If the Firewall is running, no management access
is permitted from the network.
You can log into WebPAM PROe from any PC with a network connection to the Vess A Class Series enclosure.
1. Launch your Browser.
2. In the Browser address field, type the information provided below. Then press Enter. Note that this
example uses the default IP address for Port 1
If you chose External SSL Security during installation, use the Secure Connection. Otherwise, use the Regular
Connection.
Regular Connection
• WebPAM PROe uses an HTTP connection. . . . . . . . . . . . . . . . .http://
• Enter the Subsystem IP address . . . . . . . . . . . . . . . . 192.168.0.1
• Enter the Port number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . :8090
Together, your entry looks like this:
http://192.168.0.1:8090
n
etWork
Important
59
Managing with WebPAM PROe