Ystem Recovery - Promise Vess A2600 Product Manual

Vess A2000 Series NVR Storage Appliance
s

ysteM reCoVery

The system recovery process requires that a minimal operating system called the and RAID engine
first be installed on the C drive. The files loaded to the C drive are called the Recovery Environment
(RE). Once the RE is installed the remaining elements of the system disk can be restored from the
local RAID volume, DVD or a network drive connected via SAN or NAS.
Follow the instructions in "Create the recovery environment" on page 331, then proceed to recover
the system disk according to the method by which it was backed up.
See the following sections for the final recovery stage:
• "Restore from RAID" on page 332
• "Restore from DVD" on page 336
• "Restore from network drive" on page 339
330
Promise Technologies