Slp Settings (Clu); Web Server Settings (Clu) - Promise Vess A2600 Product Manual

Vess A2000 Series NVR Storage Appliance

SLP Settings (CLU)

SLP is supported on the Linux OS version only.
By default, SLP service is set to Automatic and its normal status is Started.
To make SLP service settings:
1. Main Menu >> Additional Info and Management >> Software Management >> SLP
>> Startup Type
2. Press the spacebar to toggle between Automatic and Manual .
3. Press Control-A to save your settings.
To start, stop or restart the SLP service, highlight Start , Stop , or Restart and press Enter .

Web Server Settings (CLU)

By default, Web Server service is set to Automatic and its normal status is Started.
To make Web Server service settings:
1. Main Menu >> Additional Info and Management >> Software Management >>
Startup Type
2. Press the spacebar to toggle between Automatic and Manual .
3. Highlight the following and press the backspace key to erase the current value, then type the
new value:
• HTTP Port (8090 is the default)
• Session Time Out (24 minutes is the default. 1440 minutes = 24 hours)
4. Highlight SSL and press the spacebar to toggle between Enabled and Disabled .
5. Highlight HTTPS Port and press the backspace key to erase the current value, then type the
new value. 443 is the default.
6. Press Control-A to save your settings.
To start, stop or restart the service, highlight Start , Stop , or Restart and press Enter .
Note
162
Promise Technologies