Promise Vess A2600 Product Manual page 62

Vess A2000 Series NVR Storage Appliance
s 3: i pci
tep nsert
Removal of the cover exposes the PCIe slots located in the rear left corner.
1. Pull out the protective cover for the PCIe opening for the slot that will be used. Save this protective cover
for future use.
2. Insert the PCIe card so that it is firmly seated in the PCIe slot. When properly seated, the bracket
will flush with the backplate of the device allowing access to the PCIe functional connection. It is not
necessary to anchor the bracket with a screw since the housing cover will hold the card securely in place
when the device is completely reassembled.
Remove PCIe cover and insert card
e cArd
56
Promise Technologies