Promise Vess A2600 Product Manual page 61

Product Manual
s 1: s
tep hUt doWn system
Before opening the system housing, shut down the device and disconnect any power cords.
s 2: r
tep emove hoUsing cover
Remove housing cover
1. Use a small Phillips head screwdriver to remove all five screws that secure the cover to the rest of the
device housing. There are two small flat head machine screws, one on each side, and three dome head
machine screws that secure the cover to the backplate.
2. Slide the cover toward the rear of the device until it can be lifted off.
,
disconnect poWer
55
Hardware Setup