Promise Vess A2600 Product Manual page 15

Product Manual
v A2200/A2200
ess
Vess A2200/2200s Left panel LED
System
Power
Recording
Power
button
Front panel LED behavior for Vess A2200/A2200s system:
LED Description
Power Lights BLUE to indicate the system is powered on. Blinks BLUE in shutdown mode.
System Status Lights GREEN when healthy, RED if there is a critical problem (LD offline, fan malfunc-
tion, voltage out of range, system temperature alert), blinks RED for HDD high tempera-
ture alert remains dark when not ready.
Global RAID Lights GREEN when healthy or RED if any RAID volume is offline, ORANGE for critical
Status state of any logical drive.
Global HDD Blinks BLUE to indicate one or more drives are being accessed, remains dark when no
Activity drives are being accessed.
HDD Status One LED for each HDD carrier. Each LED lights GREEN when healthy, RED if the RAID
member is offline or there is a physical disk error, ORANGE indicates the drive is rebuild-
ing, and a dark LED indicates either no drive is installed or the drive is not configured.
Fan Status Lights GREEN when healthy, RED indicates a fan in the CPU module is not operating in
normal range, ORANGE indicates the CPU fan module is not present.
Network One LED for each LAN port. Lights BLUE to indicate a valid link, blinks BLUE to indicate
activity on the port.
OPAS USB Lights GREEN if an OPAS device (USB disk) is detected, RED if the OPAS operation has
failed, blinks GREEN when an OPAS log dump is in progress.
Recording RED indicates application running.
led
s front pAnel
Fan Status
Status
Global RAID Status
HDD
Network Link/Activ-
Activ-
ity
OPAS
ity
USB
9
Introduction
HDD Status LEDs