Mounting and Commissioning
3.1 Mounting and Connections
Processor Board A–CPU for 7SJ61.../GG
[A_CPU2_HW_GG, 1, en_US]
Figure 3-8
The jumper settings for Power supply, Control voltage, and Contact type are identical to the settings for the
processor module A-CPU ..../FF (see
246
Processor printed circuit board A–CPU for devices releases .../GG and higher with jumpers
settings required for the module configuration (as from firmware V4.7)
Processor Board A–CPU for 7SJ61.../FF, Page
244).
SIPROTEC 4, 7SJ61, Manual
C53000-G1140-C210-6, Edition 05.2016