Interface Modules - Siemens SIPROTEC 4 7SJ61 Manual

Multi-funktional protective relay with bay controller
Table of Contents

Advertisement

3.1.2.4

Interface Modules

Exchanging Interface Modules
The following Figure shows the processor printed circuit board CPU and arrangement of the modules.
[a-cpu-mitschnittstellenmodulen-sj61-020702-kn, 1, en_US]
Figure 3-11
The interface modules are located on the processor printed circuit boards CPU (No.1 in
Figure
3-4).
Please note the following:
The interface modules can only be exchanged in devices designed for panel and cubicle mounting.
Devices in surface-mounted housings with two-tier terminals have to be retrofitted at our factory.
Use only interface modules that can be ordered in our facilities via the order key, see also Appendix
A Ordering Information and
You may have to ensure the termination of the ports featuring bus capability according to the margin
heading "Termination".
SIPROTEC 4, 7SJ61, Manual
C53000-G1140-C210-6, Edition 05.2016
Processor printed circuit board CPU with interface modules
Accessories.
Mounting and Commissioning
3.1 Mounting and Connections
Figure 3-3
and
251

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents