Functions - Siemens SIPROTEC 4 7SJ61 Manual

2

Functions

This chapter describes the numerous functions available on the SIPROTEC 4 device 7SJ61. It shows the setting
possibilities for each function in maximum configuration. Information with regard to the determination of
setting values as well as formulas, if required, are also provided.
Based on the following information, it can also be determined which of the provided functions should be
used.
2.1 General
2.2 Overcurrent Protection 50, 51, 50N, 51N
2.3 Dynamic Cold Load Pickup
2.4 Single-Phase Overcurrent Protection
2.5 Negative Sequence Protection 46
2.6 Motor Protection
2.7 Thermal Overload Protection 49
2.8 Monitoring Functions
2.9 Ground Fault Protection 64, 67N(s), 50N(s), 51N(s)
2.10 Intermittent Ground Fault Protection
2.11 Automatic Reclosing System 79
2.12 Breaker Failure Protection 50BF
2.13 Flexible Protection Functions
2.14 Temperature Detection via RTD Boxes
2.15 Phase Rotation
2.16 Function Logic
2.17 Auxiliary Functions
2.18 Breaker Control
SIPROTEC 4, 7SJ61, Manual
C53000-G1140-C210-6, Edition 05.2016
28
46
72
77
87
94
113
121
132
141
147
167
174
182
190
191
193
219
27