Siemens SIPROTEC 4 7SJ61 Manual page 244

Mounting and Commissioning
3.1 Mounting and Connections
Processor Board A–CPU for 7SJ61.../FF
[prozbgr-a-cpu-geraetebises-ff-20070319, 1, en_US]
Figure 3-7
Power Supply
Table 3-7
Jumper
X51
X52
X53
244
Processor printed circuit board A–CPU for devices releases .../FF and higher with jumpers
settings required for the module configuration (as from firmware V4.7)
Jumper settings for the nominal voltage of the integrated power supply on the processor
board A–CPU as from 7SJ61.../FF
Nominal Voltage
DC 24 V/ 48 V DC 60 V to 125 V
not used 1-2
not used 1-2 and 3-4
not used 1-2
not changeable interchangeable
DC 110 V to 250 V,
AC 115 V to 230 V
2-3
2-3
2-3
SIPROTEC 4, 7SJ61, Manual
C53000-G1140-C210-6, Edition 05.2016