Siemens SIPROTEC 4 7SJ61 Manual page 242

Mounting and Commissioning
3.1 Mounting and Connections
Processor Board A–CPU for 7SJ61.../EE
[prozbgr-a-cpu-geraetebises-ee-160502-wlk, 1, en_US]
Figure 3-6
The preset nominal voltage of the integrated power supply is checked according to
voltages of the binary inputs BI1 to BI3 are checked according to
binary outputs (BO1 and BO2) is checked according to
Power Supply
Table 3-4
Jumper
X51
X52
242
Processor printed circuit board A–CPU for devices releases ../EE and higher with jumpers
settings required for the module configuration (up to firmware V4.6)
Jumper settings for the nominal voltage of the integrated power supply on the processor
board A–CPU to 7SJ61.../EE
Nominal Voltage
DC 24 V/ 48 V DC 60 V to 125 V
Not used 1-2
Not used 1-2 and 3-4
Table 3-5, and the contact mode of the
Table 3-6.
DC 110 V to 250 V,
AC 115 V to 230 V
2-3
2-3
C53000-G1140-C210-6, Edition 05.2016
Table 3-4, the pickup
SIPROTEC 4, 7SJ61, Manual