Checking The Computer To Be Connected - Ricoh Ri 100 Operating Instructions Manual

• The supplied power cord is for use with this machine only. Do not use it with other appliances.
Doing so could result in fire or electric shock.
• If the power cord is damaged and its inner wires are exposed or broken, contact your service
representative for a replacement. Use of damaged power cords could result in fire or electric
shock.
• Be sure to locate the machine as close as possible to a wall outlet. This will allow easy
disconnection of the power cord in the event of an emergency.
• Be sure to push the plug of the power cord fully into the wall outlet. Partially inserted plugs
create an unstable connection that can result in unsafe buildup of heat.
(mainly Europe, Asia, and China)
Power Source
220-240V, 0.6A or more, 50/60Hz
Please be sure to connect the power cord to a power source as above.
(mainly North America)
Power Source
100-120V, 1A or more, 60Hz
Please be sure to connect the power cord to a power source as above.

Checking the Computer to be Connected

To use this machine, computers must meet the following specifications:
• PC/AT-compatible computer with USB or network interface
• Operating system:
Microsoft Windows Vista/7/8.1/10
Microsoft Windows Server 2008/2008 R2/2012/2012 R2/2016
Mac OS X 10.8 and later versions
• For the required hard disk free space and amount of memory installed, follow the system
requirements of each operating system.
Checking the Computer and Installation Area
31