2. Preparing for Printing
7.
Tuck the edges of the fabric under the table.
Smooth out the fabric so that no wrinkles or slack remain on the print surface.
Tuck the fabric so that no wrinkles or folds remain in the area at the edges of the table.
8.
After checking that no wrinkles or slack remains on the print side, close the cover. As you
close the cover, smooth away wrinkles with your hand.
Check that the fabric is not protruding from the cassette.
When using the optional finisher, smooth wrinkles and flatten fibers after loading the fabric in the
cassette.
After closing the cover, make sure that the fabric is loaded so its surface is parallel to the cover.
74
DSA370
DSA217
DSA014