Ricoh Ri 100 Operating Instructions Manual page 217

3. Remove the stuck fabric or foreign object through the top cover opening.
Remove the fabric or foreign object carefully. Forcibly removing them may cause parts to come off.
If the print head has stopped halfway, move it to either end.
4. Close the top cover.
The power of the machine turns off and on automatically, after which it returns to the usual
condition.
5. Print the nozzle check test pattern to make sure the print head's nozzles are not clogged.
See page 120 "Nozzle Check".
• If a fabric or foreign object cannot be successfully removed, perform [Move Prnt-Heads], and then
remove the fabric or foreign object. See page 131 "Move Print-Heads".
The Cassette Does Not Operate Correctly
DSA310
DSA311
215