Ricoh Ri 100 Operating Instructions Manual page 69

16. Click [Finish].
If a dialog box asking whether you want to restart now appears, select [Yes, restart now.], and
then click [Finish].
• Although the Windows security warning may appear during installation, ignore it and continue with
the installation.
• A message appears if there is a newer version of the printer driver already installed. If this is the
case, you cannot install the printer driver using Auto Run. See page 223 "If a Message Appears
during Installation".
Using the IPP port
1. On the [Start] menu, click [Devices and Printers].
• For Windows 10: Right-click the [Start] button, and then click [Control Panel]. Once the
[Control Panel] window is displayed, click [View devices and printers].
2. Click [Add a printer].
• For Windows 10: Go to step 4.
3. Click [Add a network, wireless or Bluetooth printer].
4. Click [The printer that I want isn't listed].
5. In the [Select a shared printer by name] box, enter "http://(machine's IP address)/printer
(or ipp)" as the printer's address, and then click [Next].
6. Click [Have Disk...].
7. Insert the CD-ROM in the CD-ROM drive.
If the [AutoPlay] dialog box appears, click [Close].
8. Click [Browse...], and then specify a location for the INF file.
The Drivers are in the following folders on the supplied CD-ROM.
• RPCS raster printer driver for the 32-bit Windows
DRIVERS\X86\RPCS_R\X86\disk1
• RPCS raster printer driver for the 64-bit Windows
DRIVERS\X64\RPCS_R\X64\disk1
9. Click [Open], and then click [OK].
10. Follow the wizard's instructions to install the printer driver.
Connecting the Computer and Installing the Software (Network Connection)
67