Ricoh Ri 100 Operating Instructions Manual page 67

• Only administrators can perform this installation. Log on as a member of the Administrators group.
1. Insert the CD-ROM in the CD-ROM drive.
Quit all applications currently running.
2. Select an interface language, and then click [OK].
3. Click [Printer Driver].
4. Read the entire license agreement carefully. If you accept its terms, click [I accept the
agreement.], and then click [Next >].
5. Click [Connect to a printer port or LAN], and then click [Next >].
To search for printers automatically, select [Search for printers automatically], and then follow the
wizard's instructions.
To search for a printer by its IP address, select [Search for printers by specified IP Address], and
then follow the wizard's instructions.
If you do not search for a printer, select [Select a port or specify a new port]. In this example
procedure, [Select a port or specify a new port] is selected.
6. Select [Specify a new port] and click [Next >].
7. Click [Standard TCP/IP], and then click [Next >].
8. Click [Next >].
9. Enter the printer name or machine's IP address in the [Printer Name or IP Address] box,
and then click [Next >].
10. Click [Finish].
11. If necessary, configure the default printer.
12. If necessary, configure the setting for sharing the printer.
13. Click [Continue].
The printer driver installation starts.
14. If you want to make initial settings for the printer, click [Set Now].
15. Make initial settings, and then click [OK].
16. Select whether or not to open the Status Monitor automatically, and then click [Next >].
17. Click [Finish].
If a dialog box asking whether you want to restart now appears, select [Yes, restart now.], and
then click [Finish].
• Although the Windows security warning may appear during installation, ignore it and continue with
the installation.
Connecting the Computer and Installing the Software (Network Connection)
65