Cannot Recover Error Page - Ricoh Ri 100 Operating Instructions Manual

Cannot Recover Error Page

If you resume printing after resetting the garment misfeed error or other errors, printing may not be
correctly performed and a message appears.
Depending on the printing result, resolve the error using any of the following procedures:
If Nothing Printed
If the cassette is not automatically ejected, press the [Tray] key and move the cassette stand to the
front.
Remove the cassette and reload the fabric correctly. After reloading the cassette, press the [Start]
key to resume printing.
If printing does not start, adjust the height of the cassette, and then press the [Start] key.
See page 72 "Loading Fabrics", page 210 "Adjusting the Height of the Cassette".
If Partially Printed
Cancel printing.
See page 106 "Canceling Printing".
Status Monitor Errors
237