Clean Maint Unit - Ricoh Ri 100 Operating Instructions Manual

When print heads are clogged
If the print head is clogged, perform Head Cleaning. See page 121 "Head-cleaning".

Clean Maint Unit

You can move the Maintenance Unit to the position for cleaning. If a message prompting you to provide
regular maintenance appears, clean the Maintenance Unit.
• Do not touch the toothed rubber belt or ink tubes when cleaning the Maintenance Unit. Also, take
care not to have your sleeves caught with cables or ink tubes.
• The cleaning cloth cannot be used to clean the Maintenance Unit. Use the cleaning stick to clean it.
• If you have not cleaned the print head nozzles, proceed to clean them.
• When cleaning the Maintenance Unit, be careful not to drop the cleaning stick into the machine.
1. Press the [ /Menu] key.
2. Press the [ ] or [ /Menu] key to display [Maintenance], and then press the [#Enter] key.
<Menu>
Maintenance
CFT168
CFT169
Using the [Maintenance] Menu
133