Ricoh Ri 100 Operating Instructions Manual page 31

• areas of high/low temperature and high/low moisture
• humidifying appliances
• oil stoves and ammonia-emitting appliances (such as diazo copiers)
• Do not place the machine on an unstable surface. The vibration of the machine could deteriorate
the print quality. Place the machine on a stable surface.
Choose a flat, stable area to install the machine.
• The surface should be level within two degrees, left to right and front to back.
• To prevent condensation, install the machine in an area where temperature and humidity conditions
do not exceed those indicated in the diagram below.
• The machine may cease to print if these limitations are exceeded.
(mainly Europe, Asia, and China)
%RH
100
10°C 90%
80
15°C
80%
60
40
15°C
20
15%
10°C 5%
0
10
(mainly North America)
%RH
100
50°F 90%
80
59°F
80%
60
40
59°F
20
15%
50°F 5%
0
50 60
• White area: Operation range (Although operations are possible within this range, image
quality is not guaranteed.)
• Blue area: recommended range
• Secure the space indicated in the following figure in order to smoothly load fabrics and replace ink
cartridges.
40°C 90%
32°C
80%
32°C
15%
40°C 5%
°C
20 30 40
DSA256
104°F 90%
89.6°F
80%
89.6°F
15%
104°F 5%
°F
70 80 90 100 110
DSB258
Checking the Computer and Installation Area
29