Displaying The Counter - Ricoh Ri 100 Operating Instructions Manual

• A Full Color Coverage count:
(Full Color Coverage)=(Full Color Coverage (K))+(Full Color Coverage (C))+(Full Color
Coverage (M))+(Full Color Coverage (Y))
Ex.:
Multiple color consumption on a fabric
K: 3%, C: 8%, M: 7%, Y: 2%
(3% + 8% + 7% + 2% = 20%)
Full Color Coverage: 00000020
• A coverage ratio calculation for full color printing per page:
(Full Color Coverage)/(Total Full Color)
Ex.:
Total Full Color: 00000888
Full Color Coverage: 00007692
7692 / 888 = 8.7%
Coverage Count. figures are rounded off to one decimal place.
• Black and white files are counted as black and white prints even if color printing was specified.
• The counter numbers you can check from the [Counter] menu on the display may differ from the
counter numbers that appear on the system configuration page. For details, see page 116
"Differences Between the Counter and the Total Counter".
• As the machine prints one sheet, the counter value is incremented by 1. When you set [Select Print
Quality:] to [Vivid] in the printer driver or [Garment Type:] to [Thick Garment], the counter value is
incremented by 2 as the machine prints one sheet.

Displaying the Counter

This section explains how to display the counter.
1. Press the [ /Menu] key.
2. Press [ ] or [ /Menu] key to display [Counter], and then press the [#Enter] key.
<Menu>
Counter
3. Press [ ] or [ /Menu] key to display [Show Counter], and then press the [#Enter] key.
<Counter>
Show Counter
Using the [Counter] Menu
115