Ricoh Ri 100 Operating Instructions Manual page 47

• When sharing the machine connected via USB over a network, configure the share settings upon
installing the printer driver. See page 48 "Sharing the Printer".
Quick Install for USB
Follow the procedure below to install the printer driver.
• Do not turn the machine on until you have read how to do so.
• Only administrators can perform this installation. Log on as a member of the Administrators group.
Notes on the Installation
• Ignore the Windows security warning if it appears during installation and continue with the
installation.
• If the "Add New Hardware Wizard" appears, click [Cancel], and then turn the machine off.
1. Insert the CD-ROM in the CD-ROM drive.
Quit all other applications currently running.
2. Select a language for the interface, and then click [OK].
3. Click [Quick Install for USB].
4. Read the entire license agreement carefully. If you accept its terms, click [I accept the
agreement.], and then click [Next >].
5. Check that the power of the machine is off, and then click [Next >].
Installation starts.
Ignore the Windows security warning if it appears during installation and continue with the
installation.
6. Make sure that the computer and machine are properly connected, and then press the
[Power] key.
7. Click [Yes] to specify the machine as the default printer.
Connecting the Computer and Installing the Software (USB Connection)
DSB271
45