Monitoring And Configuring The Machine; Using The Status Monitor - Ricoh Ri 100 Operating Instructions Manual

6. Monitoring and Configuring the
Machine
This chapter describes how to monitor and configure the machine.

Using the Status Monitor

Using the Status Monitor, you can check the print job status, error messages, amount of remaining ink
and other machine status information.
You can specify how to receive notification of print job status via the Status Monitor.
1. Open the [Printing Preferences] dialog box.
2. Click the [Maintenance] tab.
3. Click [Status Monitor Settings].
4. From the list in the [Status Monitor display settings] area, select a method for launching
the Status Monitor.
5. Press [OK] two times.
• For details about [Status Monitor Settings], see the printer driver Help.
• You can cancel printing from the Status Monitor. See page 106 "Canceling Printing from the Status
Monitor".
• To check the amount of remaining ink, see page 182 "Replacing an Ink Cartridge".
• To check the amount of waste ink, see page 188 "Replacing an Ink Collector Unit".
• To check the error messages on the Status Monitor, see page 229 "Status Monitor Errors".
151