Ricoh Ri 100 Operating Instructions Manual page 103

4. Launch the Design Software and perform as specified on "Specifying the Type and
Thickness of the Fabric" and "Selecting the Cassette Size and Direction" described in this
chapter, and then shoot an image of the cassette with a camera.
Confirm that the marked position for the unstitched ornament picture can be found on the shot
image.
5. Perform specified on
fetch the picture to be printed as an unstitched ornament in the Design Software.
DSA438
6. Perform as specified on
chapter and place the unstitched ornament picture in the position marked in Step 2.
7. Perform as specified
and perform printing.
DSA362
page 88 "Selecting the Image to Print"
page 90 "Configuring the Layout Settings"
page 92 "Printing" and the following steps described in this chapter
Positioning of One Point T-shirts
described in this chapter and
described in this
DSB025
101