Cleaning; Cleaning The Top Cover - Ricoh Ri 100 Operating Instructions Manual

Hide thumbs Also See for Ri 100:
Table of Contents

Advertisement

Cleaning

Clean the outside of the machine regularly to maintain the condition of the machine.
• Do not remove any covers or screws other than those explicitly mentioned in this manual. Inside
this machine are high voltage components that are an electric shock hazard. Contact your sales
or service representative if any of the machine's internal components require maintenance,
adjustment, or repair.
• Do not attempt to disassemble or modify this machine. Doing so risks burns and electric shock.
• When performing maintenance on the machine, always disconnect the power cord from the
wall outlet.
To clean the exterior of the machine, wipe it with a soft, dry or damp cloth. If the dirt does not come off,
wipe the machine first with a cloth moistened with a neutral detergent, then with a damp cloth, and
finally with a dry cloth.
• Do not use volatile chemicals like benzene or thinner, or insecticides on the machine. Using these
chemicals could deform, crack, or change the color of the machine.
• When wiping the machine with a cloth moistened with detergent, be sure to wipe only the exterior.
• Use neutral detergent to clean the multi tray and the sleeve attachment. Using ethanol or solvent
may cause the table to deform or break.

Cleaning the Top Cover

• Do not open the cover while the machine is operating and keep your hands or fingers clear of
the machine. Doing so might cause your hands or fingers to get trapped in the machine,
potentially causing injury.
Cleaning
193

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents